All Collections
PeerClick Customer Manual
Traffic Destination and Distribution
Traffic Destination and Distribution
Updated over a week ago

Destination setting is available only for Redirect type campaigns.

1. Path

Receiving traffic from a campaign URL, tracker distributes it as follows:

  1. Firstly it checks if the click corresponds to any of the rules. If there is a match, then click is sent according to this corresponding rule.

  2. If there is no rule match, then the click is directed to one of the paths according to the traffic distribution proportions between paths.

  3. Tracker defines the landing page where traffic is sent within the selected path, or sends traffic directly to the offer, based on the settings.

Lander + Offer

The simplest configuration of one lander and one offer looks like this:

1. Choosing Lander

To select a lander, click the + New Lander button. The window of lander selection will open. Thanks to grouping and search, you can find the necessary one quickly.

After choosing the lander, it will appear inside the path. To add another lander, click the same button again. You can also select several landers, all of them will be added to the path.
You can create a new lander as well. To do this, click + New lander button. A standard window for a lander creation will open. After saving, the lander will appear on the list of landers, which opens with the + Add Landing button.

2. To send traffic directly without lander, check the Direct linking. You can use it for any path or rule, even when you have several landers.

3. Choosing Offer

To select an offer, click + Add offer. An offer selection window will open.

You can also create a new offer. To do this, click the New offer button. A standard window for offer creation will open. After saving, the offer will appear in the list of offers.You can open it clicking the + Add offer button

A / B testing

Add a few landers and offers to your path.

Traffic will be randomly distributed between the landers according to the weight of every lander. For example, on the screenshot above, the landers have the same weight. It means that the traffic will be distributed equally.

On the screenshot above, the first offer has a weight of 2, and the second one has a weight of 8. It means that the second offer will receive four times as much traffic as the first one.
The numerical value of the weight that you enter is automatically converted to a percentage for your convenience.

To add a path, click the + Add default path button.


To stop sending traffic to a lander / path / offer or to turn off one of the rule criteria, click on the slider (icon 1). To resume traffic, click on the slider again.
To move a path / lander / offer within the list, click on the icon 2.
To edit a path / lander / offer, click on the icon 3. You can also change the names of paths and rules clicking on it.
To copy paths / landers / offers, click on the icon 4. The copy will appear as - Clone at the end of the list.
To remove a path / lander / offer from the distribution, click on the icon 5.

2. Flow

If you run many campaigns with the same conversion funnel, then you can use the flow system. Create a flow and set it for many campaigns. So the traffic distribution settings for one flow will
Receiving traffic from a campaign URL, tracker distributes it as follows:

  1. It checks if a click matches one of the flows. If so, it sends it to the appropriate flow.

  2. Follows points 1-3 of traffic distribution to the path.
    If you select Flow from the Destination section, the flow selection field appears on the right side. As shown on the screen:

In the drop-down menu, select the necessary flow.

If you want to transfer the flow settings to the path settings for the specific campaign, select the desired flow from the drop-down menu and click the Convert to path button. The flow editing window will change to the path editing window with the configuration data transferred from the flow. In the Destination section Flow will shift to Path.

3. URL

Sometimes it is necessary to send traffic to a direct link without using an offer. To do this, select Url from the Destination section. In the field which appears on the right, enter the desired URL.

You can add macros for tracking to your link. Do it the same way as you've done setting your lander / offer up.

4. MyTarget

MyTarget traffic source does not support redirect funnels. But as part of a collaboration with our platform, you can set up a campaign with the following way:

  1. Select Destination as MyTarget. A field of URL destination settings will appear on the right side of the screen. Put an offer URL there.

  2. Select the MyTarget traffic source.

  3. Save the campaign.

  4. The link for the created campaign will be generated on a specially selected PeerClick domain, which cannot be replaced with a custom domain.

Did this answer your question?